To Measure A Spectrum; To Highlight; Channel 1 - Agilent Technologies 35670A Quick Start Manual
Fft dynamic signal analyzer
Hide thumbs
Also See for 35670A:
- Manual (796 pages) ,
- Service manual (439 pages) ,
- Operator's manual (322 pages)
Table of Contents
Advertisement
Making Measurements
To measure a spectrum
The Agilent 35670A evaluates signals and devices under 102.4 kHz. Dynamic range
is 80 dB guaranteed. The analyzer has a 25.6 kHz real-time rate at 400 lines of
resolution.
1
Initialize the analyzer.
Press [
] then press [
Preset
Press [
]
CHANNELS 1 2
or [
] to highlight 1.
CHANNELS 1 2 4
2
Connect the signal source as shown in the illustration.
3
Select the measurement parameters.
Press [
] [
] <number> <unit>, then press [
Freq
START
4
Specify the averaging parameters.
Press [
] then press [
Avg
28
].
DO PRESET
] to highlight ON.
AVERAGE ON OFF
Agilent 35670A Quick Start Guide
] <number> <unit>.
STOP
Channel 1
Channel 2
Hide quick links:
Advertisement
Table of Contents
