9.5.3.3
Installing the new FBU
Ê Install the FBU in the holder and connect the FBU adapter cable to the FBU
as described in section
Ê Install the FBU with the holder as described in section
on page
216.
9.5.3.4
Concluding steps
"Reassembling" on page 60
Ê
"Connecting the power cord" on page 64
Ê
"Switching on the server" on page 66
Ê
"Updating expansion card firmware" on page 82
Ê
RX1330 M3
"Preparing the FBU" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
214.
"Installing the FBU"
221