Installing The New Fbu - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
9.7.3.3

Installing the new FBU

Ê Install the FBU in the holder and connect the FBU cable to the FBU, see
section "Preparing the FBU02 (EP4x0i)" on page 335
FBU345 (EP5x0i)" on page
Ê Install the FBU with the holder, see section
9.7.3.4 Concluding steps
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
I
The recalibration of the FBU starts automatically, and finishes within a
few minutes.
344
336.
Upgrade and Maintenance Manual
or "Preparing the
"Installing the FBU" on page 337.
TX2550 M4