Installing A New Fbu; Concluding Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

9.5.3.3

Installing a new FBU

Ê Install the FBU into the FBU holder, see section
page 300.
Ê Install the FBU with the FBU holder, see section
page 302.
9.5.3.4

Concluding steps

Ê If applicable, install the SAS expander holder, see section
SAS expander holder" on page 254
Ê Install the system fan module, see section
on page 83
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
"Updating expansion card firmware" on page 104
Ê
TX1330 M4
Upgrade and Maintenance Manual
Expansion cards and backup units
"Preparing the FBU" on
"Installing the FBU" on
"Installing the system fan module"
"Installing the
309