Replacing An Fbu; Preliminary Steps; Removing The Defective Fbu; Installing The New Fbu - Fujitsu PRIMERGY RX2530 M4 Upgrade And Maintenance Manual

9.6.5

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw flash backup units into the trash can. Batteries must be
●
disposed of in accordance with local regulations concerning special
waste.
9.6.5.1

Preliminary steps

"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 52
Ê
9.6.5.2

Removing the defective FBU

Ê Remove the FBU with the holder, see section
holder" on page 263
with the holder" on page 266
Ê Disconnect the FBU cable from the FBU.
Ê Remove the FBU from the holder.
9.6.5.3

Installing the new FBU

Ê Install the FBU in the holder and connect the FBU cable to the FBU, see
section "Preparing the FBU" on page
Ê Install the FBU with the holder, see section
(2.5-inch HDD chassis) or section
HDD chassis).
RX2530 M4
(2.5-inch HDD chassis) or section
(3.5-inch HDD chassis).
"Installing the FBU" on page 260
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 15 minutes
"Removing the FBU with the
"Removing the FBU
254.
"Installing the FBU" on page 255
(3.5-inch
267