Edge-Core ECS4660-28F Management Manual page 583

Hide thumbs Also See for ECS4660-28F:

Table of Contents

Figure 321: Showing the Link Trace Cache

Use the Administration > CFM > Show Information (Show Fault Notification

Generator) page to display configuration settings for the fault notification

These parameters are displayed:

"show ethernet cfm fault-notify-generator" on page 1599

MEP ID – Maintenance end point identifier.

MD Name – Maintenance domain name.

MA Name – Maintenance association name.

Highest Defect – The highest defect that will generate a fault alarm.

(This is disabled by default.)

Lowest Alarm – The lowest defect that will generate a fault alarm

Alarm Time – The time a defect must exist before a fault alarm is

Reset Time – The time after a fault alarm has been issued, and no

defect exists, before another fault alarm can be issued

"Configuring CFM Maintenance Domains" on page

| Basic Administration Protocols

Connectivity Fault Management

Chapters

Table of Contents