Volkswagen Passat 1995 Official Factory Repair Manual page 3189

Teves 04 ABS and ABS/EDL electrical test
1)
The wiring at terminals 13 and 26 is required with control module 1H0 907 379A
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.4
Multi-pin connectors, terminal
assignment
Note:
All terminals not listed are currently not assigned!
ABS control module harness 55-pin connector -T55-
Terminal Connected to component ...
1 Ground (GND) (terminal 31)
2 Left front ABS outlet valve -N102-
3 Terminal 30 via ABS relay -J102-
7 Electronic differential lock cut-off relay -
J263-
13
ABS pressure control switch -F137-
15 ABS hydraulic pump relay -J185-
16 Brake pedal position sensor -G100-
18 Right rear ABS outlet valve -N135-
19 Ground (GND) (terminal 31)
20 Left front ABS outlet valve -N101-
21 Right front ABS outlet valve -N100-
26
ABS pressure control switch -F137-
27 Right rear ABS wheel speed sensor -
G44-
Page 3 of 36
01-41
1)
1)
12/7/2004