Volkswagen Passat 1995 Official Factory Repair Manual page 3032

Transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.6
- Install small input shaft bolt -1- with washer -2-, but
without shim.
Tightening torque: 30 Nm (22 ft lb)
- Set up dial indicator so that top of gauge is
positioned on center of bolt head with 1 mm
preload.
- Zero dial gauge.
- Move small input shaft up and take measurement.
Example: measurement = 2.00 mm
- Specify thickness of shim according to table and
determine Part No. from parts catalog microfiche.
Page 37 of 60
37-83
12/6/2004