Volkswagen Passat 1995 Official Factory Repair Manual page 2888

On Board Diagnostic (OBD) program
Rapid data transfer
DTC Memory is erased
System cannot be interrogated!
1 DTC recognized
00811 3333
System cannot be interrogated
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.01.2
Indicated on display:
(DTC Memory will be erased approx. 5 seconds after
the message is displayed.)
DTC Memory is now erased.
Note:
Wait about 1 minute before checking DTC Memory
again.
Indicated on display:
Print-out with printer switched on:
Transmission Control Module (TCM) -J217- given too
little time to recognize malfunctions.
- Wait about 1 minute before checking DTC Memory
again.
- After checking and erasing DTC Memory, carry out
a test drive and checking DTC Memory again.
When the DTC Memory is interrogated, the following
message should be displayed:
"No DTC recognized"
Page 19 of 43
01-38
12/6/2004