Volkswagen Passat 1995 Official Factory Repair Manual page 2970

Shift mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.1
Locking cable, removing and installing
Note:
Locking cable must not be kinked.
Adjust locking cable after installing
25 .
Removing
- Remove selector lever handle.
- Remove cover with cover strip.
- Remove center console.
Repair Manual, Body-Exterior, Body-Interior,
Repair Group 70.
- Loosen cable anchor screw, take locking cable
out of locking lever and pull out of cable anchor.
- Remove locking cable from clip (arrow).
- Remove trim pieces from ignition/starter switch.
- Press locking cable clip out of ignition/starter
switch and remove locking cable from ball head.
- Take out locking cable.
Page 21 of 25
37-21
page 37-
12/6/2004