Volkswagen Passat 1995 Official Factory Repair Manual page 2824

Differential, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.5
Page 4 of 10
19 - Drive flange
Install with tapered
ring, thrust washer and
compression spring
Remove before taking
out inner circlip on
bevel gear
Removing and
installing Fig. 4
Removing and
installing drive flange
for tripodic drive shaft
Fig. 5
20 - Compression spring
21 - Thrust washer
Place over
compression spring
22 - Tapered ring
Shoulder faces thrust
washer
23 - Oil seal for drive flange
Before installing, pack
space between sealing
lips with multi-purpose
grease
Can be replaced with
transmission installed
Page 39-2
Remove with VW 681
Driving in Fig. 1
39-25
12/6/2004