Volkswagen Passat 1995 Official Factory Repair Manual page 3075

4th gear clutch -K3- with pump shaft, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.38.5
Fig. 1 Removing and installing circlip
- Press down carefully on piston cap until circlip
(arrow) can be installed.
Fig. 2 Checking that piston rings are correctly
located
There is a piston ring installed on the turbine shaft
inside the clutch housing (arrow).
- Make sure that ends of piston rings are hooked
together.
Page 4 of 5
38-20
12/6/2004