Volkswagen Passat 1995 Official Factory Repair Manual page 2890

On Board Diagnostic (OBD) program
Rapid data transfer
04 Basic setting
Basic setting
Input display group number XX
System in basic setting
Rapid data transfer
Select function XX
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.01.2
Q
HELP
HELP
HELP
Indicated on display:
- Press -Q- button to confirm input.
Indicated on display:
- Press button -0- twice (to input display group 00).
- Press -Q- button to confirm input.
Indicated on display:
System is now in basic setting.
- Depress Accelerator Pedal as far as kickdown and
hold in this position for 3 seconds.
- Press
button.
Indicated on display:
Reading measured value block
- Connect VAG 1551 Scan Tool (ST), enter address
word 02 for "Transmission Electronics" and
advance Scan Tool program until "Select function
XX" is indicated on display
Indicated on display:
Press buttons -0- and -8- (to select function 08 "Read
measuring value block")
Page 21 of 43
01-40
from page 01-20 .
12/6/2004