Volkswagen Passat 1995 Official Factory Repair Manual page 3118

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Page 22 of 35
24 - Bearing body
Tightening torque: 150
Nm (111 ft lb)
When installing new
bearing, pay attention
to setting instructions
page 39-51
Differential, adjusting
Remove with tool 3155
Installing Fig. 5
25 - O-ring
Always replace
26 - Output shaft/drive
flange
Install thread facing
drive flange
Before removing, take
out differential
First adjust differential
before installing
27 - Differential
Disassembling and
assembling
39-33
Before removing
differential, take out
bearing body,
adjusting ring and
output shafts
28 - Screw
Tightening torque: 12
Nm (9 ft lb)
29 - Locking element
39-27
,
page
12/6/2004