Volkswagen Passat 1995 Official Factory Repair Manual page 2875

On Board Diagnostic (OBD) program
Rapid data transfer
Select function XX
Rapid data transfer
02 - Check DTC Memory
X DTC recognized!
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.01.2
HELP
Q
HELP
Diagnostic Trouble Code (DTC) Memory,
checking
- Connect VAG 1551 Scan Tool and enter
address word 02 for "Transmission Electronics"
and advance until "Select function XX" appears
in display from page 01-20
Indicated on display:
- Press buttons -0- and -2-. ("Check DTC Memory").
Indicated on display:
- Press -Q- button to confirm input.
The number of stored Diagnostic Trouble Codes
(DTC) or "No DTC recognized" appears in the
display.
Stored malfunctions are displayed in turn and printed
out.
- Press
button.
After the last malfunction has been displayed and
printed out, the malfunctions should be corrected as
described in the Diagnostic Trouble Code (DTC) table
page 01-26 .
- Press
button.
Indicated on display:
Note:
After checking DTC Memory and correcting
malfunctions:
- Erase DTC memory
Page 6 of 43
.
page 01-37 .
01-25
12/6/2004