Volkswagen Passat 1995 Official Factory Repair Manual page 2732

Transmission, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.14
Transmission, removing and
installing
Vehicles with 6 cylinder engines
When removing, note the following:
- Mark bolts connecting engine and
transmission
If the transmission has not been replaced:
- Make sure the engine/transmission connecting
bolts are reinserted in the same position.
Flange thickness (arrow): 55 mm
Pos. Bolt Nm
1 M 12x80
2 1)
M 12x55
3 M 12x58
4 M 12x46
2) M 7x12
5
6 M 12x58
Pos. A = Fitting sleeve for centering purposes
1) Hex bolt with M8 x 10 threaded pin
2) Transmission cover
80
80
80
80
15
80
Page 1 of 3
37-87
12/6/2004