Transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.6
Example:
Measurement = 2.00 mm:
- Insert 1.7 mm shim.
- Remove small input shaft bolt.
- Install correct shim -3- on small input shaft (arrow).
- Tighten small input shaft bolt -1- with washer -2-.
Tightening torque: 30 Nm (22 ft lb)
- Carry out planet carrier check measurement.
page 37-86
.
Page 39 of 60
37-85
12/6/2004