Volkswagen Passat 1995 Official Factory Repair Manual page 2813

Drive pinion, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.4
Page 2 of 9
4 - Hex nut, 250 Nm (184 ft
lb)
Engage parking lock to
remove or install
Secure with drift
5 - Output gear
Number of teeth
Page 00-6
Pulling off Fig. 1
If signs of damage
exist, always replace
input gear and output
gear together
6 - Tapered roller bearing
inner race
Pulling off Fig. 2
Pressing on Fig. 3
7 - Tapered roller bearing
outer race
Drive out with drift
Pressing in Fig. 4
8 - Bolt, 25 Nm (18 ft lb)
9 - Bearing cap
39-14
12/6/2004