Volkswagen Passat 1995 Official Factory Repair Manual page 3680

Airbag System, On Board Diagnostic (OBD), vehicles up to 09.94
X DTC recognized!
No DTC recognized!
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.BD01.01.1
HELP
The number of stored DTCs or "No DTC recognized"
appears on the display.
- Press
button.
The stored DTCs are displayed and printed out
one after the other.
- With the DTC printout go to the DTC table on
Page 01-11 .
After you press the
to the initial position.
Indicated in display
- Ending output (function 06)
- Switch off ignition and disconnect Data Link
Connectors (DLC).
Note:
If a DTC was recognized:
1 . Correct malfunction
2 . Erase DTC memory (function 05)
3 . Again check DTC memory (function 02)
Page 9 of 16
button, the program moves
Page 01-15 .
01-9
12/7/2004