Volkswagen Passat 1995 Official Factory Repair Manual page 2802

Final drive oil level, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.1
- Mount installation tool 3109 and remove circlip.
- Pull off drive flange with VW 391.
Note:
On vehicles with flange for Tripodic drive shaft the
joint flange is removed with Kukko 18-0 puller and
two 8x35 mm bolts with 8 mm diameter washers.
- Pull out drive flange oil seal with VW 681.
Page 3 of 5
39-3
12/6/2004