Volkswagen Passat 1995 Official Factory Repair Manual page 3459

Vehicle alignment
Vehicle alignment specifications (four wheel drive vehicles)
Front axle
Engine
Version
1)
Total toe (not pressed)
2)
Camber (in straight- ahead position) Maximum permissible
difference between sides
Toe angle difference at 20 left and right lock
Caster (not adjustable) Maximum permissible difference between
sides
1)
Only adjust total toe on right toe rod
2)
Camber corrections can only be made at the wheel bearing housing/suspension strut connection.
Camber adjustment
Note:
After adjusting steering geometry check position of steering wheel; correct if necessary.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.44.1
Page 44-6 .
Suspension strut axle
85 kW (115 hp) 128 kW (172
Base
suspension suspension
0 10'
-1 20' 20' -1 10'
max. 30'
-1 10' 30' -1 40'
+1 40' 30' +3 20'
max. 30'
Page 4 of 7
44-4
hp)
Plus
0 10'
20'
max. 20'
30'
30'
max. 30'
12/7/2004