Volkswagen Passat 1995 Official Factory Repair Manual page 2818

Drive pinion, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.4
Fig. 5 Bearing supporting ring, removing and
installing
Remove locking bolt.
A - Torque wrench
- Tighten bearing supporting ring to 200 Nm (148 ft
lb) and secure with locking screw. Install screw
with AKD 456 000 01 thread sealing compound.
Fig. 6 Bearing supporting ring with seal for
drive pinion
Installation position of seal:
Open side (arrow) faces towards tapered roller
bearing outer race
Page 7 of 9
39-19
12/6/2004