Volkswagen Passat 1995 Official Factory Repair Manual page 2977

Transmission, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.2
Transmission shifts too early or too late into
the next gear
When checking the shift points one should note
that the Speedometer can deviate from the
specified figure within the permissible tolerance.
In the tables, the gear shifts are listed according
to transmission code letters.
H = Hydraulic shift
M = Mechanical shift
The electronic program switch is built into the
Transmission Control Module (TCM). The "ECO"
or "Sport" program will be automatically selected
by the TCM according to the speed at which the
Accelerator Pedal is depressed.
For transmissions with the electronic program
switch only kick down shift points are given.
To check the shift points connect VAG 1551
Scan Tool (ST).
Repair Group 01, Reading measured value
block.
Page 3 of 8
37-28
12/6/2004