Transmission, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.3
- Tilt transmission using jack spindle and while
lowering ensure cover (wheelhousing side) is
guided closely past wheelhousing.
- Rotate transmission and lower it carefully.
- Secure torque converter to prevent it falling
out.
Transporting the automatic gearbox
Special tool 3336 may be used to transport the
automatic gearbox and also when setting up
gearbox mount 3282.
- Secure special tool 3336 to gearbox housing
flange (arrow).
- Position pins so that 8 holes are visible in chain
direction.
Page 7 of 9
37-40
12/6/2004