Volkswagen Passat 1995 Official Factory Repair Manual page 2914

Transmission electrical testing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.01.3
Note:
Use the hand multimeter (Fluke 83, VAG 1526
or equivalent)for testing.
Use auxiliary cables from the VAG 1594
adapter kit, and the test box as specified, for
connecting test equipment.
The specified values are valid for ambient
temperatures ranging from 0-40 C (32-104 F).
If the measured values differ from the specified
values, determine the cause by using the wiring
diagrams.
If the measured values differ only slightly from
the specified values, clean the sockets and
connectors of the test equipment and test
leads, then repeat the test. Before replacing a
particular component, test the wiring and
connections and, particularly if specified values
are below 10 ohms (10 ), repeat the
resistance measurement.
Electrical testing on Transmission Control
Module with 38-pin connector
Electrical testing on Transmission Control
Module with 68-pin connector
Page 2 of 33
01-60
page 01-61
page 01-73
12/6/2004