Volkswagen Passat 1995 Official Factory Repair Manual page 2985

Transmission, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.3
- Remove vacuum line -a- and connector -b- before
installing support bar into eye (arrow) on vehicles
with 6-cylinder engines.
- Disconnect front mount bracket from engine
carrier.
- Remove mount bracket.
- Remove coolant expansion tank and set aside.
- Remove left engine mount complete.
- On vehicles with 6-cylinder engine remove drive
belt cover.
- Disconnect axle shafts at transmission drive
flanges.
- Remove left wheel.
Page 3 of 9
37-36
12/6/2004