Volkswagen Passat 1995 Official Factory Repair Manual page 3127

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Page 31 of 35
12 - Speedometer drive
bushing
Drive off together with
speedometer drive
gear - 13 -
Drive on with drift
13 - Speedometer drive
gear
Drive out with drift
Fit on together with
driver bushing -item 12
-
14 - One-piece thrust
washer
Place into differential
housing before
installing bevel gears
15 - Small bevel gears
Installing Fig. 3
16 - Large bevel gears
Installing Fig. 3
17 - Circlip
CAUTION!
Do not remove the circlip
until after removing the drive
flange as the compression
spring is pre-tensioned.
39-36
12/6/2004