Volkswagen Passat 1995 Official Factory Repair Manual page 2829

Differential, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.5
Fig. 5 Drive flange for tripodic drive shaft,
removing and installing
- Bolt puller Kukko 18-0 using two 8x35 mm bolts
and 8 mm diameter washers to flange to remove
- Install flange with 3109
Fig. 6 Differential, installing
- Screw in bearing body up to stop and tighten to
150 Nm (111 ft lb).
Page 9 of 10
39-30
12/6/2004