Volkswagen Passat 1995 Official Factory Repair Manual page 3040

Transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.6
Calculating plate set height "m":
- Place straightedge "A" on thrust plate.
- Compress set of plates including pressure plate in
direction of arrows and measure the thickness of
plate set with depth gauge "B".
Example:
Measurement
- Straightedge height
Calculated dimension "m" =
1
Gap x = k + / - m
2
3.6
= 26.8 + / - 25.3 = 3.3 mm
2
- Determine size of shims according to table.
Page 45 of 60
= 73.5 mm
= - 48.2 mm
25.3 mm
12/6/2004
37-91