Volkswagen Passat 1995 Official Factory Repair Manual page 2746

Reverse gear brake - B1-, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.17
Determining shim -A- thickness
Shim thickness is determined by gap "x" and selected
from table, Page 37-104
x = K + I/2 - m
A = Shim
x = Gap
I = Position of piston in free wheel
m = Height of plate set including pressure plate
K = Constant = 26.8 mm
"K" is determined by installation height in
transmission housing and is not adjustable.
Page 3 of 7
.
12/6/2004
37-101