Volkswagen Passat 1995 Official Factory Repair Manual page 2757

Clutch play between -K1- and -K2-, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.18
Check measurement (clutch play)
- The clutch play cannot be measured until the
ATF pump has been installed.
- Attach dial gauge holder to transmission housing
and place dial gauge on turbine shaft with a
preload of 1 mm.
- Move turbine shaft up and down and read play on
dial gauge.
Play:
min. = 0.5 mm
max. = 1.2 mm
Page 7 of 7
37-112
12/6/2004