Volkswagen Passat 1995 Official Factory Repair Manual page 3630

Steering
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
For easier installation of the puller, it is recommended
that a rubber band be placed around the jaws.
Illustration shows the housing in cross section for
better view.
1 - Puller, e.g. Kukko 21/4
2 - Rubber band
3 - Roller bearing
4 - Housing
Inner sealing ring for toothed rod, removing
- Remove sealing ring for toothed rod from the
housing
- Disconnect hose line from valve body housing to
cylinder line
- Clean hose line, housing. Check threaded
connection for contamination (rubber residue,
chips)
Page 67 of 99
48-67
12/7/2004