Volkswagen Passat 1995 Official Factory Repair Manual page 3172

Teves 04 ABS and ABS/EDL On Board Diagnostic (OBD)
Diagnostic Trouble Code (DTC) table
VAG 1551 scan tool
printout
00000
No DTC recognized
00257
ABS Inlet Valve, LF
-N101
00259
ABS Inlet Valve, RF
-N99
1)
Electrical test, page 01-39
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.3
Possible cause of malfunction
If "No DTC recognized" is displayed after carrying out repairs, On Board
Diagnostic (OBD) program sequence has ended.
If, despite "No DTC recognized" being displayed, the ABS system does not
operate properly, then proceed as follows:
1. Carry out road test exceeding 40 km/h (24 mph).
2. Again check DTC memory.
If there is still no DTC stored:
3. Troubleshoot without On Board Diagnostic (OBD) and work through the
complete electrical test
Faulty wire, connector or valve
winding
Faulty wire, connector or valve
winding
.
Repairing malfunction
page 01-39 .
- Check wiring, connectors and valve
winding
Test steps 17 and 37
- Check wiring, connectors and valve
winding
Test steps 18 and 38
Page 10 of 24
01-24
1)
1)
12/7/2004