Volkswagen Passat 1995 Official Factory Repair Manual page 2740

Planet carrier, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.16
- Install small drive shaft bolt -1- with washer -2- but
without shim. Tightening torque: 30 Nm (22 ft lb).
- Set up dial gauge so that top of gauge is
positioned on bolt head center with 1 mm preload.
- Zero dial gauge.
- Move small drive shaft up and take reading.
Example: Reading 2 mm
- Specify thickness of shim according to table and
determine Part No. from parts catalog.
Page 5 of 8
37-95
12/6/2004