Volkswagen Passat 1995 Official Factory Repair Manual page 3115

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Page 19 of 35
5 - Adjusting ring
Removing Fig. 3
If used bearings are
re-installed, mark
installation position
and line up on marking
again when installing
Fig. 2
If new bearings are
installed, pay attention
to setting instructions
page 39-51 ,
Differential, adjusting
6 - Oil seal for drive flange
Before installing, pack
space between sealing
lips with multi-purpose
grease
Can be replaced with
transmission installed
page 39-2
Remove with VW 681
Driving in Fig. 1
7 - Tapered ring
Shoulder faces thrust
washer
8 - Thrust washer
Place over
compression spring
9 - Compression spring
39-24
12/6/2004