Volkswagen Passat 1995 Official Factory Repair Manual page 2774

1st to 3rd gear clutch -K1-, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.38.3
Fig. 1 Circlip, removing and installing
- Press piston cap with intermediate spring ring
down far enough for circlip (arrow) to be inserted in
groove.
Fig. 2 Thrust plate and plates, installing on
inner plate carrier
- Install thrust plate -a- with smooth side facing inner
plate and stepped side toward inner plate carrier.
- Install 3 inner plates -b- and 2 outer plates -c-.
- Clip in supporting ring with step (arrow).
Notes:
Position locating lugs correctly.
Installing corrugated washer and further plates in
clutch housing Fig. 3 .
Page 4 of 5
38-10
12/6/2004