Volkswagen Passat 1995 Official Factory Repair Manual page 2993

ATF level
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.4
ATF, topping up
CAUTION!
Too much ATF will cause transmission
malfunctions and must therefore be
extracted. This can be done with VAG 1358
A/1 and VAG 1358A probe, or EZ1 fluid
evacuator.
Only ATF with the designation Dexron may
be used. Do not use any lubricant additives.
- Add ATF using a funnel, approx. 3 liters (3.2 US
qt.) at first for an initial filling.
- Then start engine and shift through all the
selector lever positions with the vehicle
stationary.
- Check ATF level
- Use a non-fluffing cloth for wiping off the
dipstick.
The ATF level changes with the temperature of
the fluid. The Min. and Max. markings on the
dipstick refer to the correct levels for an ATF
temperature of 60 C (140 F).
page 37-43 .
Page 2 of 2
37-44
12/6/2004