Volkswagen Passat 1995 Official Factory Repair Manual page 3427

Rear axle, servicing (four wheel drive vehicles)
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.3
Fig. 3 Drive shaft, removing and installing
Loosen and tighten only when vehicle is standing on
its wheels (danger of accident).
Tightening torque: 90 Nm (66 ft lb) and turn 45
1
further ( / turn)
8
Note:
Any paint residue and/or corrosion on the thread of
the outer joint must be removed before the nut is
installed.
Fig. 4 Stabilizer bar, removing and installing
Tightening torque -A- and -B-: 25 Nm (18 ft lb)
Page 6 of 13
42-38
12/7/2004