Volkswagen Passat 1995 Official Factory Repair Manual page 2871

On Board Diagnostic (OBD) program
VAG - ON BOARD DIAGNOSTIC
1 - Rapid data transfer 1)
2 - Blink code output 1)
Rapid data transfer
Enter address word XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.01.2
HELP
HELP
Indicated on display:
1)
Operating modes -1- and -2- are displayed
alternately
Notes:
Additional operating instructions can be printed
out by pressing the HELP button on the VAG
1551 Scan Tool.
The button is used to advance the Scan Tool
program sequence.
An automatic check (bottons -00-) can be carried
out in the "Rapid data transfer" operating mode.
Then all vehicle control units will be interrogated
automatically.
VAG 1551 Scan Tool (ST) operating instructions.
- Switch ignition ON.
- Switch printer on with the PRINT button (indicator
lamp in button lights up).
- Press button -1- for "Rapid data transfer" operating
mode.
Indicated on display:
- Press buttons -0- and -2- (enter address word 02
for "Transmission Electronics").
Page 2 of 43
01-21
12/6/2004