Volkswagen Passat 1995 Official Factory Repair Manual page 3058

ATF pump, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.38.1
Fig. 1 Checking that piston rings are correctly
located
- Make sure that ends of piston rings are hooked
together.
Fig. 2 Fitting and hooking ends of piston ring
together
- Place piston ring in groove.
- To hook ends together press sides of ring in and
guide ends over one another.
- Do not twist piston ring out of groove on one side.
Page 3 of 3
38-3
12/6/2004