Volkswagen Passat 1995 Official Factory Repair Manual page 3230

Teves 20 GI Anti-lock Brakes (ABS) and Anti-lock Brakes with Electronic Differential Lock (ABS/EDL...
A
Complete
- Again check and erase DTC memory with VAG 1551 scan tool
- Carry out test drive exceeding 20 km/h (13 mph) with ABS controlled braking
- After the test drive, check DTC memory. If, after successful repairs and test drive, "No
DTC recognized" appears in the display on the VAG 1551 scan tool, the On Board
Diagnostic (OBD) is concluded.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.5
B
Carry out recommended test
steps of ...
Electrical test(s)
Further repair sequence:
End
C
25-pin connector not connected.
No voltage supply from terminal X at
ABS control module terminal 23
Poor Ground (GND) connection at ABS
control module terminals 8 and 24
Page 8 of 8
01-82
12/7/2004