Volkswagen Passat 1995 Official Factory Repair Manual page 2836

Final drive, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.8
Page 2 of 2
6 - Shim for differential
7 - Tapered roller bearings
for input gear
Always replace
together
Measure friction torque
via pinion shaft.
Friction torque of new
tapered roller bearings
must be 180 - 220
Ncm (16 - 20 in. Ib)
greater than friction
torque of pinion shaft
8 - Tapered roller bearings
for drive pinion
Always replace
together
Re-determine shim
when replacing
tapered roller bearings
9 - Tapered roller bearings
for differential
Always replace
together
Measure friction torque
via drive pinion.
Friction torque of new
tapered roller bearings
must be 60 - 80 Ncm
(5 - 7 in. Ib) greater
than friction torque of
drive pinion
39-40
12/6/2004