Volkswagen Passat 1995 Official Factory Repair Manual page 3277

Teves 20 GI ABS and ABS/EDL electrical test
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.9
Teves 20 GI ABS and
ABS/EDL electrical test
Electrical test steps (from
are valid when:
On Board Diagnostic (OBD) test program gives
no indication of the source of the malfunction.
Work through complete electrical test.
On Board Diagnostic (OBD) provides direct
indication of the source of the malfunction. Only
carry out the test steps recommended in the
Diagnostic Trouble Code (DTC) table (pin-
pointed entry).
Test requirements
Fuses -S16-, -S20- OK.
Fuses 1 and 2 for control module - ABS -
S123- and -S124- OK (remove fuses from
fuse holder to check).
Switch ignition and electrical consumers off
before beginning test (headlights, lighting,
fan, etc.).
Disconnect multi-pin harness connector from ABS
control module -J104- and connect VAG 1598/21
test box -1- to harness connector -2-.
CAUTION!
The specifications listed in the electrical test table
are matched to the specified multimeter (Fluke 83
or equivalent) and are not necessarily valid for
other test equipment.
Page 1 of 17
01-129
Page 01-132 )
12/7/2004