Volkswagen Passat 1995 Official Factory Repair Manual page 3367

Front Wheel Suspension, Shafts and Axle
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1
Outer constant velocity joint, checking
The joint should be disassembled to replace dirty
grease or for checking the balls and ball tracks
for wear and damage.
Removing
- Before disassembling mark position of the ball hub
in relation to the ball cage and housing with an
electric scriber or oil stone.
- Swivel ball hub and ball cage.
- Remove balls one after the other.
- Turn cage until the two rectangular windows
(arrow) are aligned with the joint housing.
- Lift out cage together with hub.
Page 60 of 82
40-60
12/7/2004