Volkswagen Passat 1995 Official Factory Repair Manual page 2804

Final drive oil level, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.1
- Install drive flange, dished washer and circlip.
- Pull drive flange in.
Note:
Drive flange can also be pulled in with VW 391.
- Install circlip and seal drive flange with cover.
- Install drive shaft.
- Reconnect ball joint to control arm.
- With transmission installed, check final drive oil
level Page 39-1
Tightening torque:
Drive shaft to drive flange 45 Nm (33 ft lb)
Ball joint to control arm
.
35 Nm (26 ft lb)
Page 5 of 5
39-5
12/6/2004