Volkswagen Passat 1995 Official Factory Repair Manual page 3289

Teves 20 GI ABS and ABS/EDL electrical test
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.9
ABS control module, removing and
installing
Location: bolted to the ABS hydraulic unit, left
side of engine compartment
Removing:
CAUTION!
Determine correct radio anti-theft coding
before disconnecting the battery.
- Disconnect battery.
- Remove coolant expansion tank and swing to
one side.
- Disconnect harness connector from ABS control
module.
- Connect bleeder bottle with bleeder hose to left-
front brake caliper bleeder screw and open bleeder
screw.
- Depress brake pedal at least 60 mm (2-3/8 in.).
- Install brake pedal loading device (e.g. VAG 1238
B).
- Close front left bleeder screw.
- Remove heat shield from tandem master brake
cylinder.
Page 13 of 17
01-141
12/7/2004