Volkswagen Passat 1995 Official Factory Repair Manual page 2822

Differential, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.5
Page 2 of 10
5 - Adjusting ring
Removing Fig. 3
If used bearings are
re-installed, mark
installation position
and line up bearings
on marking again
when installing
2
If new bearings are
installed, pay attention
to setting instructions,
Adjusting differential,
Page 39-49
6 - Oil seal for drive flange
Before installing, pack
space between sealing
lips with multi-purpose
grease
Can be replaced with
transmission installed
Remove with VW 681
Driving in Fig. 1
7 - Tapered ring
Shoulder faces thrust
washer
8 - Thrust washer
Place over
compression spring
9 - Compression spring
39-23
Fig.
12/6/2004