Transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.6
- Replace corrugated washer.
- Replace ATF pump seal.
- Install O-ring on ATF pump.
- Install ATF pump.
- Tighten bolts evenly, alternating cross-wise.
Tightening torque: 8 Nm (71 in lb) plus an
1
additional
/
-turn (90 )
4
Note:
1
Additional
/
-turn can be done in several stages.
4
Make sure that the O-ring is not damaged.
- Carry out check measurement of clutch play
page 37-100
.
- Install sealing plugs, valve body and oil pan
page 38-22
.
- Install cover with gasket and spacer bushings.
Page 32 of 60
37-78
12/6/2004