Volkswagen Passat 1995 Official Factory Repair Manual page 3095

Drive flange oil seal, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.2
- Pull new oil seal in up to stop with press tool 3319,
M10 threaded rod (approx. 80 mm or 3-1/4 in.
long) and nut with washer.
- Fill space between seal and dust lip with multi-
purpose grease.
- Install drive flange, dished washer and circlip.
- Pull drive flange in.
Note:
Drive flange can also be pulled in with VW 391.
Page 3 of 4
39-4
12/6/2004