Volkswagen Passat 1995 Official Factory Repair Manual page 2811

Input gear, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.3
Fig. 3 Tapered roller bearing inner race,
installing
- Install tapered roller bearing inner race with AMV
185 101 A1.
Fig. 4 Input gear, removing
- Install socket-head fastener without dished
washer, shim and axial needle bearing far enough
for a gap, size a = 3 mm, to exist between socket-
head fastener and tapered roller bearing inner
race.
- Drive out input gear with VW 771 as far as the stop
of the tapered roller bearing inner race.
- Remove VW 771 and take out input gear.
Page 5 of 5
39-12
12/6/2004